Product Categories
PVC foam P130 PVC foam is a rigid expanded sheet with a smooth gloss hardened finish on both sides.
PVC foam P130’s light weight cellular structure makes it easy to handle and fabricate. Ideally suited to signage substrates and decorative applications.
PVC foam P130 is an ideal material to replace some timbers due to water resistance. Regular sheets are available in 5mm – 55mm thickness.
PVC foam has smooth outer skin looking similar to vinyl Nitrile foam with an appearance like leather material. Closed cell PVC foam is a soft and flexible foam material which has great performance on shock absorption, low water absorption, quick recovery, moisture resistance, wear resistance and noise reduction. It is also available in a wide range of foam densities ranging from around 45kg/m3 to 260 kg/m3. Soft PVC foam is offered in large roll forms that are quite suitable for all types of die-cutting and foam slitting process. In roll form, PVC foam rubber can be easily made with PSA adhesive backing or without. It is frequently used as foam sealing gaskets, tapes or pads for industries like automotive, construction, building, military, electronics and appliance market etc..
With good impact strength, low resin absorption, high fatigue resistance, good fire performance (self-extinguishing) properties, PVC foam P130 is extremely consistent in cross section and bonds well to resin and laminate constructions. Like boatbuilding, nacelles, turbine generator housings and many others.
Item | Test Standard | P130 | |
Density ( kg/m³) | AM-008/ISO845 | Average | 130 |
Minimum | 120-150 | ||
Compressive Strength(Mpa) | AM-014/ISO844 | Average | 3 |
Minimum | 2.6 | ||
Compressive Modulus(Mpa) | AM-014/ISO844 | Average | 170 |
Minimum | 145 | ||
Shear Strength(Mpa) | ISO1922 | Average | 2.4 |
Minimum | 2.1 | ||
Shear Modulus(Mpa) | ISO1922 | Average | 50 |
Minimum | 40 | ||
Shear Strain(%) | ISO1922 | Average | 40 |
Minimum | 30 | ||
Tensile Strength(Mpa) | AM-104/ASTMC297 | Average | 4.5 |
Minimum | 3.5 | ||
Tensile Modulus(Mpa) | AM-104/ASTMC297 | Average | 175 |
Minimum | 135 |
NOTE:
1. The typical data listed in this report, for more product information, please consult the technical data report.
2. The Company reserves the right to modify the index. Technical data are subject to update with prior notice.
Racket | Shipbuilding | Yacht |
Union Composites
Union focuses on the manufacturing of composite materials and is the designated distributor of Jushi Group, which can provide customers with composite products of stable quality. Union is committed to meeting diverse customer needs and can customize products.
Q: What is your thickness and thickness tolerance?
A: Our regular thickness is from 2mm~70mm, and we also support customized thickness. Thickness tolerance is ±0.2mm.
Q: Which surface treatment do you have of PVC foam?
A: Plain board; Punched board;
One side or two sides grooved board;
One side or two sides grooved and punched board;
Scrim board; Scrim and punched board;
Hyperbolic board; Hyperbolic punching plate...
We could also support customized surface treatment.
Q: How about your delivery time?
A: We provide fast delivery: small orders: 5-7 days; full container: 15-20 days.
Q: How about your MOQ and samples?
A: No MOQ, we could provide A4 free samples.
Q: Do you have other relevant materials?
A: Yes, we have all materials for infusion and autoclave process. Like peel ply, vacuum bagging film, flow mesh, infusion tube, spiral tube, sealant tape, vacuum hose, vacuum connector and many others.